|
|||||
|
To format a date as MM-DDD-YY Today: to get Yesterday’s date: PRINT REPLACE(right(UPPER(convert(varchar(20),getdate()-1 ,06)), len(convert(varchar(20),getdate()-1,06))), ‘ ‘, ‘-‘) Extra date format for Microsoft SQL: Vancouver, BC, 22 June 2011 – Actenum Corporation today announced that Aramco Services Company’s subsidiary of Saudi Aramco, the world’s largest petroleum company?has acquired DSO/Upstream for use by Saudi Aramco’s Exploration Department. DSO/Upstream will enable Saudi Aramco users to manage exploration drilling programs on a multi-year basis, balancing scheduled activities against available resources and departmental targets. Using DSO/Upstream’s multi-objective optimization facility, together with its integrated scenario generation and analysis features, schedulers will be able to track and control key metrics as drilling programs are created and updated over time. [ad#ad-2] The easiest way to fix this is to setup Windows DHCP or Linux DHCP and pass TFTP IP address from your DHCP Server. I fixed my issue by setting up DHCP in Windows 2003, then as per Cisco recommendation, I added the option 150 to the DHCP, check this link: http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a008055c1fe.shtml There is another step, in Windows 2003, . . . → Read More: Cisco 7940/7960 Protocol Application Invalid If you are receiving error copying staxmem.dll then Click Start, go to RUN, type cmd press enter esentutl /p %windir%/security/database/secedit.sdb then go to Control Panel, Add/Remove Program then Add/Remove Windows Components, first, uncheck Internet Information Services (IIS) —-Make sure to backup your Intepub folder just in case click next to remove it. then . . . → Read More: Installing IIS – issue with staxmem.dll I had worked on this for almost two days and finally managed to figure it out… lots of people are having issues converting Cisco 7940 from SIP to SCCP… Make sure that you have the following files in your TFTP server: – SIPdefault.cnf: change the first line, which is image_version: “P00307000200”, you might have something like “P003-08-8-00” which . . . → Read More: Coverting a Cisco 7940 SIP to SCCP in FreePBX sometimes you might get the following error message in you upload an MP3: Error Processing: “sox: Can’t open input file ‘/var/lib/asterisk/mohmp3/ I convert the MP3 file to WAV and it worked ok… make sure that you convert it to 11,025 kHz, 16 Bit, Mono . . . → Read More: sox: Can’t open input file ‘/var/lib/asterisk/mohmp3/ Microsoft PowerShell comes as Features under windows 2008. To install Powershell go to Server Manager, Features, click on Add Features, scroll all the way down, select Windows PowerShell. it might take up to 20 minutes for Powershell to be . . . → Read More: How to install Windows Powershell on Windows 2008 If you get the message: “I’m sorry, an error has occurred” edit voicemail.conf in /etc/asterisk under [default] you might find empty [] remove and save the file.. reload asterisk and this should fix it. i.e: [general] [] remove [] . . . → Read More: I’m sorry, an error has occurred – voice mail – new install Installing NDOutil add-on for Nagios sometimes might be a painful process… for most case it’s just permission issue, specially mysql and NDO sock… most of the time, you might get the following error message: first of all, make sure that you use unix socket in your config file and not TCP.. it’s recommend to use unix socket… I have recently installed Asterisk 1.4.23 on Debian Lenny… I’m sure there are lot of people looking for article in regards to Asterisk and Debian… here is a good one: http://www.corenetworks.com.au/wiki/doku.php?id=install_voip_server everything is explained pretty good there… There is also script designed that will kind of do A to Z to you… however, you need to pay attention . . . → Read More: Installing Asterisk and Freepbx on Debian 5.0 (lenny) |
|||||
|
Copyright © 2024 peshvar.com - All Rights Reserved |
|||||
